Increased sensitivity can be achieved for the automated Phosphate method by implementation of a special flow cell in the San++. This long pathlength flow cell combines an increased optical pathlength of 500 mm with a small sample volume (125 µl).
This makes this application particularly well suited for challenging samples with ultra low concentrations of Phosphate as for instance in seawater, but also for Phosphate analysis in other aqueous samples such as drinking & surface water.
Skalar’s automated method for Phosphate analysis is based on the following procedure. The ammonium hepta molybdate and potassium antimony (III) oxide tartrate react in an acidic medium with diluted solutions of phosphate to form an antimony-phospho-molybdate complex. This complex is reduced by L (+) ascorbic acid to an intensely blue-colored complex which is measured spectrometrically at 880 nm.
Typical performance data and analysis results of Skalar’s Phosphate application on the San++ analyzer using the new type of flow cell can be found in the table and graphs below.
|San++ analysis data||Phosphate|
|Range||0 - 40 µg P/L|
|Minimum Detection Limit (MDL)||0.07µg P/L|
Total Phosphate calibration curve (up to 40 µg P/L)
Total Phosphate calibration (up to 40 µg P/L)
The high sensitivity of phosphate analysis obtained with this new flowcel makes Skalar’s San++ analyzer the perfect choice for detecting extremely low levels of phosphate and other parameters in aqueous samples.
If you require more information on this Phosphate application or other Skalar analyzers & applications, please do not hesitate to contact us.